Flooding and Well Water Safety Sheet

Flooding and Well Water Safety

During a flood, there is an increased risk that drinking water wells may become contaminated

with bacteria and/or any other contaminants that may be present in the flood water. Any well

water system, whether deep or shallow, can become contaminated when flooding occurs.

Homeowners are responsible for assessing the risk to their wells and should boil water used for

drinking and cooking if the risk is high.

Once the flood waters recede, everyone with a private water supply that has been affected by

flooding should get a bacteria test done before resuming usual water consumption. Laboratory

contact information can be found under ‘Steps for testing well water’.

Risk factors for well water

There is an increased risk of contamination of well water when:

• wells or aquifers are shallow and/or the overlying soils are permeable (ex: sand or gravel)

• wells are located in pits or depressions where water can pool

• wells have rusted, cracked or unsealed casings that do not extend at least 30 centimeters

above ground

• wells are near septic tanks or fields, barns, feed lots or other potential sources of contamination

• wells are near unsealed abandoned wells, sink holes, quarries or other potential groundwater

contamination pathways

• wells close to yours are flooded and may be contaminated

• wells are in close proximity to surface water sources, such as a stream, river or lake

When boiling is necessary

If any of the above risk factors pertain to your well and your property is experiencing flooding,

or if you notice a change in the colour, clarity, taste or odour of your well water; then tap water

used for drinking or for preparing food should be brought to a rolling boil for one minute.

Once boiled, the water is safe to be used for:

• drinking

• making infant formula and juices

• cooking

• making ice

• washing fruits and vegetables

• brushing teeth

An alternative to boiling water is to use water from a known safe source such as bottled water.

For additional information, please see Manitoba’s Boil Water Advisory Fact Sheet #1 ‘Boil

Water Advisory For Drinking Water Only’.

Using water for other domestic purposes

Tap water from flood-affected wells can be used for:

• laundry

• bathing

• washing dishes

Adults, teenagers and older children can use the water to shower but should avoid swallowing

the water. Toddlers and infants should be sponge bathed instead of bathing in a tub.

Testing well water

Once flood conditions have subsided, your well water should be tested by an accredited

laboratory for bacterial contamination. You should continue to boil your water or use bottled

water until testing confirms the water is safe for drinking or food preparation.

Homeowners are responsible for collecting their own well water samples. For instructions on

how to collect a proper water sample, please see Manitoba’s Well Water Fact Sheet #2 ‘How

to Test Well Water For Bacteria’.

Sample bottles, a sample submission form, and instructions for sampling are available from

most rural municipal offices, Manitoba Conservation and Water Stewardship offices, or

directly

from the laboratory.

It is very important to follow the sampling instructions provided by the laboratory and ensure

that the sample submission form includes accurate contact information and well location

information (ex: legal land description).

Bacteria testing subsidy program

The Province of Manitoba offers private water system owners a once-a-year subsidy for

bacteriological (total coliform and E. coli) analysis of their drinking water through Horizon

Lab. If the first sample result indicates that bacteria are present in the water, homeowners will

receive a coupon from the lab for one resample free of charge.

The total price to homeowners for the once-a-year subsidized sample is $19.16 (tax included).

Horizon Laboratory Ltd.

4055 Portage Avenue Street

Winnipeg, MB R3K 2E8

Phone: 204-488-2035

Other accredited laboratories

Two other laboratories in Manitoba are accredited to do bacteriological testing of water and offer

this service to private well owners. The Province doesn’t subsidize testing at these laboratories

and private well owners are encouraged to contact the laboratory directly for pricing.

ALS Environmental

1329 Niakwa Rd East, Unit 12

Winnipeg, MB R2J 3T4

Phone: 204-255-9720

Toll Free: 1-800-607-7555

Maxxam Analytics

Unit D, 675 Berry Street

Winnipeg, MB R3H 1A7

Phone: 204-772-7276

Toll Free: 1-866-800-6208

Submitting well water samples

Sample bottles need to be dropped off at one of the above mentioned laboratories within

24 hours of collection. Water samples must remain sealed and kept cool. Samples that get

too warm, freeze, or sit too long will give incorrect results.

Receiving water samples results

Once testing is completed, the results for your well water sample will be forwarded to you

by the laboratory along with follow-up instructions if the well showed signs of contamination.

If you do not receive the results within two weeks of submission, you should follow up with

the laboratory.

If there is an immediate concern about the safety of your water (total coliform >10 and/or E. coli

present), the laboratory, or a drinking water officer, will try to establish live voice communication with

you within a few days following sample submission to advise you of the concern.

Visit the Office of Drinking Water website at www.manitoba.ca/drinkingwater or call the Private Well,

Education and Outreach Coordinator at 204-948-1351 if you have questions about your results or on

water use.

Well restoration after flooding subsides

Extensive well restoration may be needed if your well has been structurally damaged, completely

submerged, overtopped, or if you’ve seen flood water draining into your well as opposed to

wells that may have had a little seepage.

Floodwater and sediment can damage pumps and their electrical components. All assessments,

repairs and replacements should be done by qualified professionals where this type of extensive

damage has occurred. It may not be safe to turn on your pump until your well is cleaned out,

and all sediment and floodwater are removed.

Well owners who have experienced this type of problem should contact the Groundwater

Management Section at 204-945-6959 or other appropriately qualified professionals (ex:

licensed well drillers or plumbers) in their local area.

For more information

For more information on drinking water safety, water treatment devices, help with interpreting

your drinking water quality results, or to receive a copy of other drinking water fact sheets,

please visit the Office of Drinking Water website at www.manitoba.ca/drinkingwater or contact

the Private Well, Education and Outreach Co-ordinator at 204-948-1351. To locate a local office

near you, please refer to the website at http://www.gov.mb.ca/conservation/waterstewardship/

odw/reg-contacts/index.html.

For information on certification for water treatment devices, visit www.nsf.org.

For information on well driller reports, well construction, well sealing, or for a listing of licensed

well drillers, contact Manitoba Conservation and Water Stewardship, Groundwater Management

Section at 204-945-6959.

For health information, contact Health Links at 204-788-8200 in Winnipeg; toll free at

1‑888‑315-9257 or contact your local public health office. To find your nearest office, go to:

www.manitoba.ca/health/publichealth/offices.html.

March 2014

 

2017 Road Closures

RD 150W between Road 48N and Road 49 N Re-opened

RD 51N between Road 137W and Road 138W Re-opened

RD 50N between Road 146W and Road 147W Re-opened

RD 50N between Road 148W and Road 149W Re-opened

Harrison Bridge Road – Re-opened

RD 41N between Road 133W and Road 135W – Re-opened

RD 43N between Road 137W and Road 139W – Re-opened

RD 46N between Road 137 W and Road 139W